Dan's Racing Supply

 Assembled with new piston and internal parts and quality control checked and pressure tested.

From $4.99 (after discount only $4.74)

GM Metric Rotor ’79 - Up

2.75 lbs lighter than stock.
15.89 lbs.
5 x 5 with 5/8” Coarse Studs installed 10.5” diameter,1” thick
Stock Appearing
Also drilled for 5 on 4-3/4” bolt pattern.

Kit contains bearing kit, hub cap, seal, spindle nut, retainer and cotter key.

From $4.99 (after discount only $4.74)

 GM Metric Rotor ’75 - ’81
2.5 lbs lighter than stock.
18.25 lbs. Fits pinto pin
5 x 5 with 5/8” Coarse Studs installed 11” diameter, .875” thick
Stock Appearing
Also drilled for 5 on 4-1/2” bolt pattern

From $4.99 (after discount only $4.74)

• 10.19 inch Diameter Brake Rotor
• 14.8 lbs. with 5x5 inch bolt circle. Lighter Weight than other hubs, legal with IMCA.
• This hub gives better clearance than the other on a modified with 64-72 chevelle lower a-frames.
• Bolts up to 1974-up Pinto or Mustang II Spindle
• HYBRID ROTOR MUST USE SPECIFIC CALIPER BRACKETS (40122PL / 40122PR)

Also drilled for 5 on 4-3/4” bolt pattern.

Ultralight Vented straight vane rotors.
Available in .81 inch. Provides stability over
a wide temperature range. Standard applications
include Late Model, Open Wheel, Modified, Hot Rod,
Off Road, Pro Series, Rally and Road Race.

From $5.99 (after discount only $5.69)

 Wilwood Ultralight Curved 32 Fin Rotors
1.25 inch right and left curved 32 vane rotors.
UL Curved vane rotor improves cooling
performance, strength and durability.
For use in Late Model, Modified, Open
Wheel, Road Race and Off Road applications.

5 X 4 3/4” BOLT PATTERN
DIAMETER 11 5/8”
TO BE USED WITH CB-1750 BRAKE CALIPER BRACKETS.
USES STOCK STYLE METRIC GM CALIPER
GREAT FOR LIMITED MODIFIEDS.

GM 7.5" metric caliper brackets. Bolt-on brackets. Right and Left                    USES STOCK STYLE METRIC GM CALIPER GREAT FOR LIMITED MODIFIEDS.

CB-1750-LT        Left Rear

CB-1750-RT       Right Rear

Bolt-on available in
Standard or Metric &
in left and right Metric Pinto
Spindle mount.
Weld-on available in
Dynalite, Superlite,
GM Standard & GM Metric Rear

For use with 1978-up GM metric calipers and for use with 11.75" rotors.

(This is for the Left Rear Only), Picture shows for a Right Rear.