Dan's Racing Supply

Hand siphon drum pump dispenses or transfers low viscosity fluids from a 55-gallon drum. Self priming bulb delivers up to 5 gallons per minute.

Allstars New! Plastic Drum Pum

Suggested Retail $14.99

Normal Price $124.99

Tire tool perforates tire surface for better traction. Steel roller is 2" wide with a series of 1/4" tall, straight pin rows. 5" wood handle. Use caution when handling and storing tool, pins are needle sharp.

Regular Price $159.99

Molded plastic basin and lid slide together to prevent spilling of fluid. A crank handle is included for manual operation. A length of straight hex shaft is also included for use with an electric drill. 16" square x 7" tall. 14 quart capacity

Regular Price $14.99

Specially hardened drill bit is required for drilling spring steel. The 17/64" size simplifies installation of 1/4" hardware. Sold individually.

Spring steel punches place a 1/4" diameter hole 1/2" from the end of Allstar's 1" x .062" thick spring steel material. Built in stop positions material within punch for accurate hole placement. Choose from two types. ALL23116 is placed on a hard surface and struck with a light hit from a 3 to 4lb hammer. ALL23117 can be placed in a vice or handheld and impact driven using a 3/4" socket (punch spring steel already mounted to race car).

ALL99013 Replacement Mandrel For ALL23116

ALL99014 Replacement Mandrel For ALL23117

Spring steel punches place a 1/4" diameter hole 1/2" from the end of Allstar's 1" x .062" thick spring steel material. Built in stop positions material within punch for accurate hole placement. Choose from two types. ALL23116 is placed on a hard surface and struck with a light hit from a 3 to 4lb hammer. ALL23117 can be placed in a vice or handheld and impact driven using a 3/4" socket (punch spring steel already mounted to race car).

Steel tire prep stand is a must when grooving, siping, grinding or even cleaning tires. Bolts together, and the pivoting head eases tire mounting. A locking T-handle secures the head assembly. Can be used with 5x5 or Wide 5 wheels.

Manual steel tire prep mount eases grooving, siping, grinding or even cleaning tires.

With Swivel Mount ALL10562 $279.98

 Special one-way bearings prevent "roll back" when grooving or siping. Bolt to a wall stud or other solid surface. Can be used with 5x5 or Wide 5 wheels. ALL10562 wall swivel (soldseparaManual steel tire prep mount eases grooving, siping, grinding or even cleaning tirestely) allows use at various angles.

ALL10565 Electric Tire Prep Stand, Greatd for tire grinding and sanding.

Electric tire prep stand eases grooving, siping, grinding and even cleaning of tires. Two-way switch permits clockwise or counterclock wise rotation. Foot operated pedal controls the rotation of the tire. A 110v accessory outlet is included for convenient plug-in of siper or groover. Stand will accommodate 5x5 or Wide 5 wheels.

ALL10668 Set Up Tool replaces the front coil-over shock assembly to simulate range of front suspension movement for checking bump steer and roll center.

Tool replaces the front coil-over shock assembly to simulate range of front suspension movement for checking bump steer and roll center. Hex head, threaded shaft raises and lowers suspension to simulate racing conditions. Jam nuts can be positioned to limit rebound and compression.

 ALL10675 Quality Tape Measure, 16 Ft.

16' x 3/4" blade has fractional markings every 1/8" for quick reference.

Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact, deburr and chamfer while drilling and do not require a center punch. Titanium nitride coated high speed steel. 1/4" hex shank. Six step bit drills: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". Nine step bit drills: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4". Thirteen step bit drills: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2".

ALL14305 2" Grease Gun Tip

ALL14306 4" Grease Gun Tip

Funnels with extensions work great for adding fluids in hard to reach areas. Standard funnel is useful for power steering, and automatic transmissions. Funnel with flexible extension is ideal for differentials and manual transmissions. Built-in hang tab allows funnel to be secured to body or frame for hands-free filling.

ALL40107 18" Flex Spout Funnel 

ALL40108 15" Straight Spout Funnel

Tool separates ball joint from control arm or spindle. Inside of cylinder is shaped to fit tapered stud of ball joint.

ALL11174 Ball Joint Spreader Tool separates ball joint from control arm or spindle.

ALL11175 1" Extensions (Set Of Two) Add $22.99

Remove burrs from damaged or rusted external threads on bolts, spindles, axle tubes, threaded shaft, pipe, and pipe fittings. 

Choose from three different files, each 8-1/2" long. Standard and metric sizes.

ALL11037 Thread File, 11-12, 13-14, 16-18, 20-24TPI (Thread Pitch)

ALL11038 Thread File, 9-10, 12-16, 20-27, 28-32TPI (Thread Pitch)

ALL11039 Thread File, 0.75-1.00, 1.25-1.50, 1.75-2.00, 2.50-3.00mm (Thread Pitch)

Tungsten steel taps are titanium coated for long life and clean sharp internal threads. Taps are available in right-hand and left-hand threads.

ALL11064 RH 1/2"-20 Fine Thread Tap

ALL11065 LH 1/2"-20 Fine Thread Tap

Tungsten steel taps are titanium coated for long life and clean sharp internal threads. Taps are available in right-hand and left-hand threads.

ALL11066 RH 5/8"-18 Fine Thread Tap

ALL11067 LH 5/8"-18 Fine Thread Tap

Tungsten steel taps are titanium coated for long life and clean sharp internal threads. Taps are available in right-hand and left-hand threads.

ALL11068 RH 3/4"-16 Fine Thread Tap

ALL11069 LH 3/4"-16 Fine Thread Tap

43/64" bit is correct for drilling hubs or axle flanges to accept most 5/8" wheel studs with .690" knurl diameter. 1/2" shank.

Durable tin snips have offset blades to keep hands clear of metal while cutting. Non-slip jaws cut through sheet aluminum and up to 18 gauge low carbon steel. Blade length 1-1/4", total tool length 9-1/4".

ALL11030 Left Hand Cut, Red Grips, Tin Snips

ALL11031 Right Hand Cut, Green Grips, Tin Snips

A fast and easy way to remove burrs from the edges of machined or cut metals. Five piece kit includes handle, telescopic blade holder and three unique blades. Handle has built-in storage for blades. Blade holder adjusts from 1" to 5".

Professional quality gun with comfort grip handle for easy one hand operation. Gun accepts a standard 14 oz. grease cartridge, features an air bleeder valve to eliminate air lock, and includes a flexible 12" long fill hose

 ALL10525 Air Hose Kit includes three feet of 3/8" hose and two 3/8"NPT fittings to connect air hose reel to air supply. Hose may be cut to desired length before fittings are installed.

ALL10525 Air Hose Kit (Reel To Air Supply)

Tester checks cylinder compression from 0 to 300 PSI and features an air-hold valve to reset gauge. Two brass fittings with o-rings are included for 14mm and 18mm spark plug threads. Easy to read 2-1/2" dial is encased in a metal housing with a 12" flexible hose attached.

Sipe tires quickly and effortlessly while maintaining precise control. Siping can greatly improve traction. A locking lever and blade clamping screw secures up to 13 blades in the head assembly. Blades can be easily positioned up or down to desired cutting depth. A built in blade rail holds blade strips in place while individual blades are snapped away. Tool heats in 10-15 minutes. 110V plug in operation only.

ALL99104 Replacement Tension Lever Kit

Avoid damage and fluid leaks during storage and transport of many popular transmissions. Multi-positional stand also keeps the transmission level and clean during servicing. An adjustable rear stabilizer bracket can be moved fore and aft as well as vertically to accomodate a variety of transmissions. Overall dimensions 11" x 14" x 6".

Fits Many Popular Transmissions Such As:

Tire grinding helps extend the life of used tires by removing a thin, hardened layer of rubber. Heavy duty 7" Milwaukee sander has a 0-6000 adjustable RPM range, to compensate for varying tire hardness, and features a 10 ft. detachable cord. Backing pad and discs are sold separately. Tech Tip: You're grinding too fast if you see blue smoke while grinding. Lower the rpm under the smoke range for best results.

Milwaukee sander has a 0-6000 adjustable RPM range