Blocks-Stands-Parts
Quality Engine Blocks from, Dart, Procomp, World Products, GM-Bowtie and Wheeler Racing.

 

!
WHEELER
WHE-ZMB3504125F

TOMAHAWK RACE BLOCK

• Block available finish honed and ready to assemble with accessory kit installed
• Finished blocks available in 4.125”, 4.155” bores
• Siamese cylinders (no water jacket between cylinders, larger bore capability, increased rigidty and strength)
• 4-Bolt mains front to rear, center (3) caps splayed
• ARP main studs
• Priority main oiling
• 9.010” deck height on finished blocks
• Main bore diameters are standard 350 SBC
• Requires .300” tall lifters for roller applications
• Extra thick pan rail
• 2-piece rear main seal
• Weighs 190 pounds ready to assemble
• Dry sump scavange and pressure provisions provided
• Factory left hand dipstick, block has provision to be drilled for right hand dipstick

FREIGHT ONLY!!!! MUST SHIP TRUCK TO BUSINESS

WHEELER
WHE-PMB350-30

PERFORMANCE SERIES BLOCK

• Chevy 350
• Seasoned GM 4-bolt blocks
• Oven baked and shot peened
• Checked for cracks, stroker clearance
• Lined bored/honed mains with Sunnen Equipment
• Decked with BHJ fixture – Cylinders perpendicular to crankshaft
• Finish honed with Sunnen CV 616 & torque plates
• Each block comes with brass freeze plugs, Durabond one-piece cam bearings, OE nodular caps and stock main bolts installed
FREIGHT ONLY!!!! "MUST SHIP TO BUSINESS ADDRESS"
DART
DRT31161111

DART SPECIAL HIGH PERFORMANCE IRON SMALL BLOCK

FEATURES:
• Made in the USA!
• Siamese bores 4.000" or 4.125" (unfinished)
• At 4.165" bore cylinder walls are .230" thick
• Clearance for 3.75" stroke w/steel rods
• 350 main journals
• Splayed 4-bolt center three main caps
• Two piece rear main seal
• Uses 1981-1985 stock style oil pan and dipstick
• All OE bolt holes for starter, clutch ball, etc.


FREIGHT ONLY!!!! "MUST SHIP TO BUSINESS ADDRESS"

Why waste your valuable time sourcing, cleaning, machining and prepping a 30 year old core in the hope that it won’t turn out unusable?

The new Special High Performance (SHP) block from Dart gives you all the features you need to build powerful and durable engines at affordable prices. The SHP block features siamese cylinders with 4.000" or 4.125" standard bore sizes available, and can safely be bored to 4.165". Cylinder walls are a minimum of .230" thick at 4.165" bore.

The block is machined using precision digital CNC equipment and is virtually ready to assemble right out of the box after a final cylinder hone.

Decks are even and parallel, lifter bores, cam and main tunnels are finished.

The SHP block is designed for compatibility with stock components, so no costly special parts are required for assembly.

TL-2000

ENGINE STAND

FOLDS UP FOR EASY STORAGE
This engine stand was made to allow for a low center of gravity when transporting an engine. It is constructed of heavy wall, 1.250" square, steel tube.