"Your Circle Track Parts Headquarters"...
Honeycomb screen, Radiator Mount Kit, Fan Spacer Kits, High Pressure Radiator Caps, Water Wetter and Gates Flex Radiator Hoses.
Water Wetter Reduces coolant and cylinder head temperatures by as much as 30 degrees.
Adding one 12 oz. bottle improves ability of coolant to wet heat transfer surfaces by 50 percent. Reduces coolant and cylinder head temperatures by as much as 30 degrees.
Purple Ice is a high performance, synthetic, radiator coolant additive for both gasoline and diesel engines.
16OZ BOTTLE
Purple Ice is a high performance, synthetic, radiator coolant additive for both gasoline and diesel engines. It is formulated to reduce the surface tension of the coolant, which improves heat transfer through the cooling system while providing additional protection against rust, corrosion and erosion. Purple Ice prevents the formation of scale deposits in the radiator for optimum coolant flow and lubricates the seals of the water pump. It is ideal for use in straight water racing applications or in antifreeze / water mixtures. Makes engine run approx. 28 degrees cooler than water/antifreeze mix.
This proven coolant additive will reduce your operating temperature up to 30°F reducing engine wear that occurs during extreme use. NEW Radiator Relief™ is also formulated with a corrosion inhibitor that reduces mineral deposits.
Fan spacers position fan closer to radiator or fan shroud and away from pulleys. 1.5" - 3" spacers are uniquely designed allowing spacer to remain bolted to water pump while changing fans. Aluminum spacers include reducer bushing, four Allen bolts to secure spacer to water pump and four hex bolts with washers to secure fan to spacer. Note: ALL30180 and ALL30182 include one set of four Allen bolts only.
Higher cooling system pressure raises the boiling point of coolant and reduces the risk of overheating.
Upper Radiator Mount Kit NEW!
Channel rests on top of the core and two flat aluminum straps may be bolted or welded to the channel. Hook the steel springs into provided hole and connect to a lower chassis location. Kit includes channel (2" x 21.5"), two straps (1" x 11.5") and two 17" springs.
• Engineered to resist electrochemical degradation – the leading cause of hose failure.• Heavy-duty flexible hose designed to replace straight or curved coolant hoses.• The benefit is maximum coverage with minimum inventory• Excellent flexibility, yet collapse and kink resistant.• Heat resistant construction throughout
• Gates recommends replacing all clamps when replacing the hose.• Heat and ozone resistant cover.• Gates Vulco-Flex II hose will bend in almost any direction.• Replicates the angles of original equipment coolant hose.• Improved sealing surface for greater leak resistance and increased flexibility
